Industrialised construction: transforming the industry with productisation & DfMA innovation

2-year warranty from the manufacturer.

Switch off the vacuum and unplug it..Remove the pre-motor and post-motor filters (check the manual for model-specific instructions.).

Tap off excess dirt, then gently rinse the filters under cold water.Don’t use soap..Allow the filters to air dry for at least 24 hours.. How to Clean Your Shark’s Filters.

Step 1: Switch Off and Unplug the Vacuum.Never clean a vacuum’s filter when the vacuum is switched on or plugged in.

You also shouldn’t use the vacuum with the filter removed, as this allows dust, pet dander, and other particles to clog the motor and escape into the air.. We always recommend washing filters outdoors if possible.

Any loose dirt or other particles on the filter will escape into the air when it’s removed..Here’s an example of how to clean the pre-filter on a Dyson Small Ball vacuum cleaner:.

Hold the filter under a cold water tap, with the open side facing upwards, until the water runs clear..Turn over the filter to allow water to drain out.. Run cold water all over the outside of the filter until the water is clear.. Gently squeeze out excess water..

Allow the filter to fully dry..Washing Dyson Post-Filters.